|
|
Aluminum Dump Series |
 |
 |
SPECIFICATIONS
| Logitudinals: 5" Heavy Duty I-Beam | Tailgate: 3/16" |
| Crossmembers: 4" U Channel | Front Plate: 3/16" |
| Rear Crossmember: 4" x 1/4" Sq. Tubing | Underbody Gussets: 3/16" |
| Floor: 1/4" | Cab Protector: 3/16" |
| Bottom Rail: 1/4" (Extruded) | Hydraulic Tank: 3/16" /12 Gauge |
| Top Rail: 1/4" (Extruded) | Sub-Frame: 2" x 4'"x 1/4" Steel Tube |
| Hoist Well: 1/4" Top And Sides | Hoist Mount: 12" x 35 lb./ft. Steel Channel |
| Sides: 3/16" | Body Prop: 2" x 2" x 1/4" Steel Tube |
DIMENSIONS
| Inside Width: 87 3/4" | Vertical Side Support Spacing: 26" o.c. avg. |
| Outside Width: 95 15/16" | Full Cab Protector: 54/60" Long |
| Crossmember Spacing: 14" o.c. avg. | Body Spacing from Cab: 4" (typ.) |
HYDRAULICS
| Hydraulic/Pump/Valve: Permco 2.5 Gear - 38 GPM @ 1400 RPM Lever Control | Hoses: 1" x 36" H.P. - 1 1/4" x 36" L. P. |
| PTO: Muncie H. D./Two Gear Air Controlled | Hydraulic Tank-Side Mount: 13" x 22" x 22" - 28 Gal. Capacity |
| Hoist: Custom, front-mount telescopic |
FEATURES
| Spreader Chains and Brackets | Shovel Bucket on Bulkhead |
| Center Board Gussetts (w/Wood Sideboards) | Sloping Inside Bottom Rail (Cleanouts) |
| Manual Operating Tailgate | Cast Aluminum Outside Steps, Driver Side Front |
| Fabricated Inside Step, Driver Side Front | 24" x 36" Rubber Flags Behind Rear Tires |
| 24" x 30" Aluminum Flaps in Front of Rear Tires w/Double Brace | Weather/Shock Resistant Sealed Beam Lights., 14 Gauge Wiring |
| Wiring Enclosed in Clear Plastic Conduit | Painted Nominal 2" Fir Side Board with Brackets |
| Boxed-In Truck Frame | Continuous Welded Side Panels and Tailgate |
| Shut-Off Valve on Hydraulic Tank | Exterior Bleeder Valve and Grease Fitting Top of Hoist |
| Body Guide Hold Downs | Bolt on Tailgate Steel |
Please contact us for a complete selection of optional materials or customization.
